Hyperion - HS2213-2600
Specifications
- Type: Outrunner
- Weight: 54.00g (1.90oz)
- Diameter: 27.90mm (1.10in)
- Length: 50.70mm (2.00in)
- Shaft Diameter: 3.17mm (0.12in)
- Maximum Amps: 26
Constants
- kV: 2640
- Rm: 0.063
- Io: 1.1
Test Data
Mazeppa1 test results
| Propeller | Gear Ratio | Volts | Amps | Watts | RPM | Speed (mph) | Thrust (g) | Thrust (oz) | RPM as % of Kv*V |
|---|---|---|---|---|---|---|---|---|---|
| GWS EP 5x4.3 | 1 | 11.22 | 18.5 | 207 | 0 | 0.0 | 725 | 25.60 | 0% |
| APC 5x5 | 1 | 11.09 | 25.3 | 280 | 0 | 0.0 | 518 | 18.30 | 0% |
| APC E 5.1x4.5 | 1 | 11 | 30.7 | 337 | 0 | 0.0 | 686 | 24.20 | 0% |
| APC E 5.25x4.75 | 1 | 11.1 | 27.8 | 308 | 0 | 0.0 | 608 | 21.45 | 0% |
| APC E 5.5x4.5 | 1 | 10.7 | 27.5 | 294 | 1 | 1.0 | 680 | 24.00 | 0% |
| EMP 6x4 | 1 | 11.1 | 28 | 310 | 0 | 0.0 | 901 | 31.80 | 0% |
Comments
Mazeppa1 on 2014-09-26 16:50:23
Fit anad finish are very good. Smooth and vibration free.
Works very well in parkjets, performance is excellent.
Works very well in parkjets, performance is excellent.
Mazeppa1 on 2014-09-26 16:56:06
Prop test data obtained using a cobbled up test block consising of a piece of 2x4 with a motor mount on it and velcro for attaching the battery, ESC, rcvr and wattmeter.
Setup motor and prop in pusher configuration and set the whole shebang on a digital kitchen scale.
Not exactly lab level work, but should be usable. Works for me.
Setup motor and prop in pusher configuration and set the whole shebang on a digital kitchen scale.
Not exactly lab level work, but should be usable. Works for me.
Mazeppa1 on 2014-09-26 17:31:53
Motor was run to WOT, noted the readings as soon as they stabilized and called it good.
You must login or register to add a comment.